Epson Stylus Photo PX700FW Service Manual page 183

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Be careful not to damage the Scanner Carriage FFC since they are
secured with double-sided tape (x2).
Peel off the Scanner Carriage FFC from the Scanner Lower Housing, and
5.
remove the Scanner Carriage Unit.
Scanner Carriage FFC
Scanner Carriage Unit
Figure 4-170. Removing the Carriage Unit (3)
When attaching the Scanner Cable Cover, route the FFC and
Grounding Wire as shown below.
Artisan 800/PX800FW/
TX800FW
A Scanner Carriage FFC
Scanner CR Encoder FFC,
Cover Open Sensor FFC
Figure 4-171. Attaching the Scanner Cable Cover
DISASSEMBLY/ASSEMBLY
Artisan 700/PX700W/ Rear
side TX700W
C Grounding Wire
Rib
Disassembly Procedures
https://www.manualsbooks.com
After replacing or removing the Scanner Carriage, be sure to
� � � � �
� � � �
perform the required lubrication. (See
�
"MAINTENANCE".)
� � � � �
� � �
side
Revision C
Chapter 6
171
Confidential