Epson Stylus Photo PX700FW Service Manual page 127

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Slide the Ratchet Holder Assy to the left, and release the rib A. (See
4.
4-36.)
Slide the Ratchet Holder Assy to the front to remove it from the Upper
5.
Housing, and remove it from the Panel Unit.
Ratchet Holder Assy
Step 5
Figure 4-36. Removing the Ratchet Holder Assy (2)
Release the hooks (x3) of the Front Panel Unit Cover. (See
6.
Slide the Upper Panel Cover in the direction of the arrow to release the hooks
7.
(x6), and remove the Upper Panel Cover.
Front Panel Unit Cover
Panel Unit
Figure 4-37. Removing the Panel Unit (1)
DISASSEMBLY/ASSEMBLY
Fig.
Panel Unit
Step 4
Rib A
Fig. 4-37.)
Upper Panel Cover
Hook of the Upper Panel Cover
Hook of the Front Panel Unit Cover
Disassembly Procedures
https://www.manualsbooks.com
Disconnect the Panel FFC from the connector of the Panel Unit. (See
8.
4-38.)
Remove the screw (x1) that secures the Panel Unit and remove the Panel Unit
9.
from the Upper Housing.
Panel Unit
Connector
Panel FFC
Figure 4-38. Removing the Panel Unit (2)
Align and insert the dowel of the Right Hinge to the positioning
hole of the Panel Unit. (See
Insert the rib A of the Ratchet Holder Assy to the position
shown in Fig. 4-36. (See
After removing/replacing the Panel Unit, make the specified
� � � � �
� � � �
adjustments. (See Chapter 5
�
� � � � �
� � �
Revision C
Fig.
Upper Housing
Positioning hole & dowel
C.B.P. 3x10 (6±1Kgfcm)
Fig. 4-38.)
Fig. 4-36.)
"ADJUSTMENT".)
116
Confidential