Epson Stylus Photo PX700FW Service Manual page 151

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Remove the screw (x1) that secures the Intermediate Roller fixing plate, and
4.
remove the Intermediate Roller fixing plate from the Lower ASF Paper Guide
Assy.
Rear side
Roller fixing plate
Lower ASF Paper Guide Assy
Figure 4-90. Removing the Lower ASF Paper Guide Assy (3)
Remove the Intermediate Roller A from the Lower ASF Paper Guide Assy.
5.
Rear side
Lower ASF Paper Guide Assy
Figure 4-91. Removing the Lower ASF Paper Guide Assy (4)
DISASSEMBLY/ASSEMBLY
Intermediate Roller A
C.B.P. 3x8 (6±1Kgfcm)
Intermediate Roller A
https://www.manualsbooks.com
Paper feed defect will occur if the flap of the Lower ASF Paper
Guide Assy comes off; therefore, take care in the following
points to make sure that the flap is surely attached when
installing the Lower ASF Paper Guide Assy.
Make sure that the shaft of the flap is surely installed.
The ribs (x2) of the flap are positioned on the rear of the Lower
ASF Paper Guide Assy.
Rear side
Disassembly Procedures
Flap
Figure 4-92. Installing the flap
Confidential
Revision C
Rib
139