Epson Stylus Photo PX700FW Service Manual page 253

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
4. To reduce measurement errors, lift and lower each part
press each part easily.
5. Check all the dial gauges, and adjust the parallelism adjustment bushings within
the standard values in the order of closest to the dial gauge indicating the biggest
value.
Standard Each dial gauge must be:
value within -0.05mm to +0.05mm
Each gauge's value range (max. to min.)
must be within 0.05mm.
Figure 5-38. PG adjustment
ADJUSTMENT
of the jigs lightly, then
Relation between dial gauge's value and PG
PG: wider
������
PG:
narrower
�
�
�
�
�
�
Adjustment without Using Adjustment Program
https://www.manualsbooks.com
+
+
-
Figure 5-39. Operating the parallelism adjustment bushing (Left side)
+
Front
Figure 5-40. Operating the parallelism adjustment bushing (Right side)
6. Tighten the screw of each parallelism adjustment bushing to secure them.
5-34 )
7. Remove the parallelism adjustment jigs from the printer mechanism.
Revision C
-
+
-
- -
Confidential
Front
( Fig.
238