Pick-Up Roller - Epson Stylus Photo PX700FW Service Manual

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Never touch or damage the surface of the LD Roller as doing so can
adversely affect print quality.
Slide the LD Roller in the direction of the arrow and pull out the Section A of
5.
the shaft from the Base Frame, then remove the LD Roller by pulling out the
other side of the shaft from the Base Frame.
Rear side
Base Frame
Figure 4-101. Removing the LD Roller (5)
Make sure to align the dowels (x4) on the Base Frame with the
positioning holes (x4) when reassembling the Rear Paper Guide
Assy. (See Fig. 4-100.)
When replacing the LD Roller, make sure to carry out the specified
� � � � �
� � � �
lubrication. (See Chapter 6
�
� � � � �
� � �
DISASSEMBLY/ASSEMBLY
Section A
LD Roller
"MAINTENANCE".)
Disassembly Procedures
https://www.manualsbooks.com

4.2.4.10 Pick-up Roller

Parts/Components need to be removed in advance:
Cassette Unit
Removal procedure
So as to make description easier, the printer in the photographs is
placed vertically in the following steps. Be careful about ink spilling
if the printer is tilted in practical operation.
Release the hook (x1), and remove the Pick-up Roller Shaft Bush and Pick-up
1.
Roller Transmission Shaft.
Pick-up Roller Shaft Bush
Pick-up Roller
Transmission Shaft
Figure 4-102. Removing the Pick-up Roller (1)
Revision C
Pick-up Roller
Hook
143
Confidential