Stacker Assy - Epson Stylus Photo PX700FW Service Manual

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
So as to make description easier, the printer in the photographs is
placed vertically in the following steps. Be careful about ink spilling
if the printer is tilted in practical operation.
Release the hooks (x3) on the bottom and dowel (x1) on the front side of the
3.
Left Housing, and remove the Left Housing in the direction of the arrow.
Left Housing
Figure 4-21. Removing the Left Housing / Decoration Belt L (2)
Align and insert the rib in the front inside of the Left Housing to
the inside of the rib of the Base Frame.
Rib of the Left Housing
Figure 4-22. Installing the Left Housing
Align the positioning hole of the Left Housing with the dowel of
the Base Frame. (See
DISASSEMBLY/ASSEMBLY
Positioning
hole & dowel
The ribs of the Left
Housing and the Base
Frame are inside.
Hook
Rib of the Base Frame
Fig. 4-21.)
Disassembly Procedures
https://www.manualsbooks.com

4.2.2.8 Stacker Assy

Parts/Components need to be removed in advance:
ADF Unit (Artisan 800/PX800FW/TX800FW only)/Scanner Unit/Upper Left
Housing/Paper Guide Top Assy/Upper Housing
Removal procedure
Pull the Stacker Assy.
1.
Bend the center of the Stacker Assy and release the dowels (x4) from the
2.
grooves of the Base Frame, and remove the Stacker Assy.
Stacker Assy
Figure 4-23. Removing the Stacker Assy
Revision C
Dowel
110
Confidential