Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Close the Scanner Unit while temporarily tightening them
screw (x1).
Tighten the screw (x1) after making sure that there is no
gap between the Scanner Unit and the printer.
Check the gap.
Figure 4-208. Installing the Scanner Unit (2)
Make sure to insert the terminal of the Grounding wire to the
fixing rib of the frame. (See
For the routing the FFCs, see
When installing the Cable Cover, secure it with a new Harness
Cover Clamp. (See
After removing/replacing the Scanner Unit, make the specified
� � � � �
� � � �
adjustments. (See
Chapter 5
�
� � � � �
� � �
DISASSEMBLY/ASSEMBLY
Fig.
4-204.)
4.4 "Routing FFC/cables"
Fig.
4-203.)
"ADJUSTMENT".)
Disassembly/reassembly procedures specific to Artisan 700/PX700W/TX700W
https://www.manualsbooks.com
4.3.1.2 Upper Left Housing (Artisan 700/PX700W/TX700W)
The disassembly/reassembly procedures for Artisan 800/PX800FW/
TX800FW differ from those of Artisan 700/PX700W/TX700W, see
4.2.2.4 "Upper Left Housing / Panel Lock Button" (p106)
procedures.
Parts/Components need to be removed in advance:
None
Removal procedure
Remove the screw (x1) that secures the Upper Left Housing.
1.
Slide the Upper Left Housing to the rear side, release the hooks (x2) and
2.
remove the Upper Left Housing.
(p202).
Figure 4-209. Removing the Upper Left Housing
Revision C
for the
Upper Left Housing
Hook
C.B.P. 3x10 (black) (6±1Kgfcm)
187
Confidential