User Counter; Automatic Elevator - Kodak i5 50 Series User Manual

User Counter

Automatic Elevator

A-61868 November 2016
• Application Overrides — allows you to set the language, printing,
maximum length detection, automatically start scanning, document
handling, paper source, post scan rotation, misfeed detection and scanner
speed options. Most screens that are accessed from the Application
Overrides screen provide the Application Settings option. The Application
Settings option is the default and indicates that the scanner will use the
settings as defined in your scanning application.
For more information about Application Overrides, see "Application
overrides" on page 51.
• Reset All Settings — resets all options to the factory default settings.
This option enables a counter that you can control. Once enabled, the counter
goes to 0 and is incremented for every document fed. You can reset this
counter at any time.
If the User Counter is set to On, the Toggle Counter and Reset User Counter
options will be available from the Ready screen.
• If you touch Toggle Counter on the Ready screen, the Document counter
icon will be displayed in the status area of the Scanning and Ready
screens next to the Counter value.
• If you touch Reset User Counter on the Ready screen, the User counter
icon will be displayed in the status area of the Scanning and Ready
screens, next to the Counter value.
If the User Counter is set to Off, the Toggle Counter and Reset User
Counter options will not be available from the Ready and Scanning screens.
Only the Document Counter value will be displayed in the status area.
When this option is On, the input elevator will automatically raise to the feeding
position when paper is added to an empty input elevator.
45