Kodak i5 50 Series User Manual page 34

20
• Adjusting the angle of the output tray — it is strongly recommended that
you scan documents with the angle of the output tray in the "up" position to
achieve best stacking performance. Just lift the front of the output tray and
the height adjustment tab will release from underneath the output tray.
To lower the output tray, gently push the height adjustment tab underneath
the output tray while lowering the output tray on to the front printer access
cover.
• Adjusting the side guides and document stop — the side guides and
document stop can be adjusted in a variety of ways. Open and adjust the
side guides on the output tray to match the position of the side guides on the
input elevator. The side guides can also be folded flat against the output
tray.
Adjust the output tray document stop to slightly longer than the longest
document being fed. If you are scanning documents longer than the output
tray will accommodate, fold the document stop flat on the output tray.
A-61868 November 2016