Rear Exit; Viewing The Operator Log - Kodak i5 50 Series User Manual

Rear Exit

Viewing the Operator Log

30
Use this option when you have documents that require special handling (e.g.,
fragile documents, shipping envelopes, etc.). When scanning these types of
documents, the rear exit allows a straight-through paper path that allows
documents to easily pass through the transport. If using this option, open the
rear exit by touching the checkbox. The touchscreen will indicate that the Rear
Exit is Open.
When you touch Operator Log, the Operator Log screen will be displayed.
This screen provides the time, message code and a message description.
The messages that are displayed in the log are only those messages that have
occurred since the scanner was powered on. When you turn the power off or
the scanner goes into Standby or Low Power mode, the Operator Log on the
Operator Control Panel touchscreen will be cleared.
To view messages which have been cleared from the Operator Control Panel
touchscreen, see "8 Troubleshooting" on page 113.
• After viewing the operator log, touch Close to return to the Ready screen.
A-61868 November 2016