Performing A Print Test - Kodak i5 50 Series User Manual

Performing a Print Test

34
The print test checks to be sure the ink jets in the optional Enhanced Printer
are working properly.
NOTE: This option works for both the front and rear printer.
1. Select Print Test. The Print Test screen will be displayed.
2. Place a blank sheet of paper in the input elevator.
3. Press the Start/Resume button. The document in the output tray will be
scanned and the results of the print test will be displayed.
4. Remove the document from the output tray and evaluate the appearance
of the test pattern.
• If the pattern is complete, you are ready to scan.
• If the test pattern is inconsistent, verify that the ink cartridge is installed
properly, or you may need to clean the print head or change the ink
cartridge.
Acceptable
NOTE: Clean the print head by removing it from the printer carrier and
dabbing the print head with a damp cloth. For procedures on
removing or changing the ink cartridge, see "4 Document
Printing" on page 61.
5. Touch Cancel to return to the Ready screen.
Unacceptable: pattern
is inconsistent
A-61868 November 2016