Replacing The Imaging Guides - Kodak i5 50 Series User Manual

Replacing the imaging
guides
110
The imaging guides should be replaced when they are heavily scratched and
defects show in the image.
NOTE: Handle the imaging guides carefully so as to not put fingerprints on the
guides.
1. Open the scanner cover.
2. Loosen the screws on each end of the lower imaging guide and remove it
from its position.
3. Install the new imaging guide and tighten the screws to secure the imaging
guide.
4. Repeat Steps 2 and 3 to replace the upper imaging guide.
5. Close the scanner cover.
A-61868 November 2016