Identifying The Tie-Down Points; Hauling The Machine - Toro Reelmaster 3105-D Operator's Manual

Figure 49
1. Bypass valve
3. Close and latch the hood.
4. Connect the tow vehicle to the machine at the
tie-down points; refer to
Points (page 38).
5. Sit in the operator's seat, and if needed, use
the parking brake to control your machine while
being towed.
Important:
Do not start the engine while the
bypass valve is open.
6. Before starting the engine, close the bypass
valve by rotating it 90° (1/4 turn).
Identifying the Tie-Down
Points
Figure 50
1. Tie-down loops
g352601
Identifying the Tie-Down
g336541

Hauling the Machine

•
Use full-width ramps for loading the machine onto
a trailer or truck.
•
Tie the machine down securely.
38