Installing The Exhaust Guard - Toro Reelmaster 3105-D Operator's Manual

Figure 32
1. Hood latch
7. Screw the bolt into the other arm of hood-lock
bracket to lock the latch in position
Note:
Tighten the nut and bolt until the bolt no
longer moves forward and backward in the CE
lock bracket.
Figure 33
1. Nut
2. Arm of hood-lock bracket
g354465
(Figure 33).
g350021
3. Bolt
12
Installing the Exhaust
Guard
CE Machines
Parts needed for this procedure:
1 Exhaust guard
4 Self-tapping screw
Procedure
1. Position the exhaust guard around the muffler
while aligning the mounting holes with the holes
in the frame (Figure
1. Exhaust guard
2. Secure the exhaust guard to the frame with 4
self-tapping screws
24
34).
Figure 34
(Figure 34).
g008875