Notation for Areas of Concern
Inspection performed by:
Item
Date
1
2
3
4
5
Pre-Maintenance
Procedures
Preparing for Maintenance
1.
Park the machine on a level surface.
2.
Lower the cutting units.
3.
Engage the parking brake.
4.
Shut off the engine, and remove the key.
5.
Wait for all parts to stop moving.
Lifting the Front of the
Machine
1.
Chock the tires.
2.
Jack the front of the machine under the square
tube of the lower frame as closely to the side
plate as possible.
Figure 51
1. Side plate
3.
Support the machine with jack stands rated for
the weight of the machine under the square tube
or wheel motors; refer to
29).
Information
2. Square tube
Specifications (page
Lifting the Back of the
Machine
Using a Hoist
1.
Chock the tires.
2.
Secure the hoist to the tie-down loop of the
rear-wheel fork
1. Frame
2. Rear wheel motor
3.
Carefully raise the machine.
4.
Support the machine with jack stands rated for
the weight of the machine under the frame; refer
to
Specifications (page
g363504
42
(Figure
52).
Figure 52
3. Tie-down loop (rear-wheel
fork)
29).
g363503