Table of Contents
Advertisement
Specifications
Note:
Specifications and design are subject to
change without notice.
Transport width
Width of cut
Length
Height
Net weight*
Fuel tank capacity
Ground speed
* With cutting units and fluids
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to
www.Toro.com
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
203 cm (80 inches) in 183
cm (72 inches) width of cut
234 cm (92 inches) in 216 cm
(85 inches) width of cut
183 cm (72 inches) or 216 cm
(85 inches)
248 cm (93 inches)
193 cm (76 inches) with ROPS
844 kg (1,860 lb)
28 L (7.5 US gallons).
Mow: 0 to 10 km/h (0 to 6
mph); Transport: 0 to 14 km/h
(0 to 9 mph). Reverse: 0 to 6
km/h (0 to 4 mph)
for a list of all
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation
Before Operation Safety
General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Before you leave the operator's position, do the
following:
– Park the machine on a level surface.
– Disengage and lower the cutting units.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Wait for all movement to stop.
– Allow the machine to cool before adjusting,
servicing, cleaning, or storing it.
•
Know how to stop the machine and shut off the
engine quickly.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Before mowing, always inspect the machine to
ensure that the cutting units are in good working
condition.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
•
This product generates an electromagnetic field.
If you wear an implantable electronic medical
device, consult your health care professional
before using this product.
Fuel Safety
•
Use extreme care in handling fuel. It is flammable
and its vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
•
Use only an approved fuel container.
•
Do not remove the fuel cap or fill the fuel tank
while the engine is running or hot.
29
Advertisement
Table of Contents
