Toro Reelmaster 3105-D Operator's Manual page 16

1. Grease fitting
2. Lift arm flange (left)
3. Snap ring
2. Assemble the cylinder to the flanges with the
mounting pin and 2 snap rings
3. Apply No. 2 lithium grease to the grease fittings
of the lift arm and the hydraulic cylinder
10).
Assembling the Lift Cylinder to
the Right Lift Arm
Grease type: No. 2 lithium grease
1. Align a drain pan below the hydraulic fittings of
the lift cylinder (Figure
2. At the lift cylinder, loosen the straight swivel
fitting of the return hose and the 90° swivel fitting
of the lift hose (Figure
Figure 10
4. Mounting pin
5. Lift cylinder (cap end)
(Figure
11).
Figure 11
12).
g346438
1. Straight swivel fitting
(return hose)
10).
3. Wrap a rag around the hose fittings.
4. Slowly move the lift-cylinder rod until it aligns
(Figure
with the holes in the right lift-arm flanges
13).
Important:
out at the hose fittings when you move the
lift-cylinder rod.
g346441
1. Grease fitting
2. Lift arm flange (right)
3. Mounting pin
5. Assemble the rod to the flanges with the
mounting pin, 2 spacers, and 2 snap rings
(Figure
6. Apply No. 2 lithium grease to the grease fittings
of the lift arm and the hydraulic cylinder
13).
16
Figure 12
2. 90° swivel fitting (lift hose)
Some hydraulic fluid is forced
Figure 13
4. Snap ring
5. Lift-cylinder rod
6. Spacer
13).
g346440
(Figure
g346439
(Figure