Driving The Machine In Transport Mode - Toro Reelmaster 3105-D Operator's Manual

Driving the Machine in
Transport Mode
1. Move the cutting unit drive switch to the
D position.
ISENGAGE
2. Raise the cutting units to the transport position.
3. Move the mow/transport slide left to the
T position.
RANSPORT
Figure 45
1. Transport
Important:
Be careful when driving between
objects so that you do not accidentally damage
the machine or the cutting units. Use extra care
when operating the machine on slopes. Drive
slowly and avoid sharp turns on slopes to prevent
rollovers.
Note:
You cannot lower the cutting units while
operating the machine the transport mode.
g352480
2. Mow/transport slid
34