Installing The Exhaust Guard; Installing The Ce Decals - Toro Reelmaster 3100-D Operator's Manual

13
Installing the Exhaust
Guard
CE Machines
Parts needed for this procedure:
1 Exhaust guard
4 Self-tapping screw
Procedure
1. Position the exhaust guard around the muffler
while aligning the mounting holes with the holes
in the frame (Figure
Figure 36
1. Exhaust guard
2. Secure the exhaust guard to the frame with 4
self-tapping screws
36).
(Figure 36).
14

Installing the CE Decals

CE Machines
Parts needed for this procedure:
1 Year of production decal
1 CE decal (Part No. 133-8095)
Tilt danger decal (121-3598)
Applying the Year of Production
Decal and CE Decal
1. Wipe clean the left frame near the model/serial
plate with alcohol, and allow the frame to dry
(Figure 37).
1. Model/serial plate
2. Remove the backing and apply the Year of
Production decal to the frame near the serial
plate as shown in
g008875
3. Wipe clean the left frame near the hood lock with
alcohol, and allow the frame to dry
26
Figure 37
2. Year of production decal
Figure 37.
(Figure
g352028
38).