Table of Contents
Advertisement
Card Mode
Employee
Administrator
Visitor
Arm/Disarm
Special ID (P40x(T))
16.
Select a [Output Level(SSA-S30xx, SSA-S21xx) Only]. This option is available in SSA-S30XX and SSA- S21xx,
which you can specify if necessary. You can use this function to divide the door opening time in 4 levels for
authenticated access. This function complies with the operation time specifi ed in [System Management] >
[Reader Point Setting].
17.
Check [Valid Date] if you want to use the validity time option.
18.
Enter the [Valid from] and the [Valid by], respectively.
19.
If you have lost the card, check [Lost] and provide the date when you lost the card.
20.
Provide the [Issue Date] and [Return Date] if you want to record the issue and return dates.
21.
Select an [Access Group]. Access will be allowed for the doors belonging to the selected access group. And
the access time will be limited according to the time schedule applicable to the access group.
22.
Select a [Lift Group].
Access will be allowed for the fl oors belonging to the selected lift group. And the access time will be limited
according to the time schedule applicable to the lift group.
23.
Click [Issue] on the bottom of the screen.
24.
Move to the [Detail Information] tab. This is an optional item that can be specifi ed if necessary.
25.
Provide information for necessary items in the [Detail Information] tab.
26.
Move to the [Biometrics Management] tab.
Uses the issued card to access the door.
In Two Men Authentication mode, the administrator should be authenticated with two cards including the
visitor card before entering the door.
In Two Men Authentication mode, the visitor should be authenticated with two cards including the admin
card before entering the door.
If using the Arm/Disarm feature, you can set or release the arm using the Arm/Disarm code.
This is a special-purpose ID that can control the opening and closing times of the door. This is available
only in SSA P40x(T) where you must select the special ID reader point in the [Reader Point Setting] if you
want to adjust the output items for that ID.
Description
English Englis_
English _75
Advertisement
Table of Contents
