Samsung TECHWIN SAMS Pro User Manual page 118

Card Design

Screen descriptions
At this step, you can decide whether to use the both sides of the card.
You can confi gure the work space for the card design for both sides or single side of the card.
Single-sided design is for one-sided card design. Printing the fi nished design applies to the front side of card.
Both-sides design is for designing both sides of a card. Printing the fi nished design applies to front and back sides of card.
If your printer does not support double-sided printing, you need to manually feed printable card or paper for printing.

Using the interface
•
Single-sided
Step 1) Select Single-sided radio button.
Step 2) Click [Next] to proceed.
•
Double-sided
Cannot select this option if selected label paper in the previous step (card size setup).
Step 1) Select Double-sided radio button.
Step 2) Click [Next] to proceed.
4. Once card face setup is complete, background setup screen appears as shown below.

Screen descriptions
At this step, specify the background color or image for the card design.
Card background color is for the background fi lling of the applicable side of the card.
If specifi ed, the applicable face of the card is fi lled with the designated color.
Card background image is for the background fi lling of the applicable side of the card.
If specifi ed, the applicable face of the card is fi lled with the designated image.

Using the interface
If selected Single-sided Mode in the [Use both sides of card] step above, you can set the background items
only for the front side of the card.
If selected Double-sided Mode in the [Use both sides of card] step above, you can set the background items
for both front and rear sides of the card.
If no background was set and clicked [Save] button, the card's background is set to white color.
118_ Card Design