Samsung TECHWIN SAMS Pro User Manual page 116

Card Design
2. Once the basic information is entered, the below sizing screen appears.

Screen descriptions
At this step, specify the card size.
The card size means the working screen's size for the card design. In other words, the printable size of the card.

Using the interface
•
For plastic cards
Step 1) For plastic cards, select the plastic card radio button.
Step 2) Select the name of the plastic card to be used.
Step 3) Check and confi rm the width and height of the selected card.
Step 4) Click [Next] to proceed.
•
For Label Paper : When you select the Label Paper, only the Single-sided mode is available in the next step.
Step 1) For label paper print, select Label Paper radio button.
Step 2) Select the name of the label paper to be used.
Step 3) Check and confi rm the width and height of the selected label.
Step 4) Click [Next] to proceed.
•
User-defi ned label: if there is no label paper in the list, select user-defi ned for custom size label. Size
estimation (unit conversion: 100 pixels ≒ 1 inch ≒ 2.54 cm) can be useful when approximating the card size.
Step 1) Select User Defi ned radio button.
Step 2) Enter an integer value of the width of label into the width fi eld. (MAX: 1150)
Step 3) Enter an integer value of the height of label into the height fi eld. (MAX: 1150)
Step 4) Click [Next] to proceed.
116_ Card Design