Table of Contents
Advertisement
System Management
DOOR SETTING
Explains how to setup name of the entrance/door, entrance and exit readers of the door, and other options.
(This is not available in SAMS Pro Lite.)
Door Setting [Add]
1.
From the upper menu, select [System Management] > [Door Setting].
2.
Click Add <
3.
Select a [Site].
4.
Select a [Loop]. Select the Device.
5.
Move to the [Door 1] tab. According to the selected device's type, number of door tabs may vary.
When selected a 4-Door device, there will be 4 door setting tabs appeared.
6.
Enter the [Door].
7.
Select [Area].
8.
Select an [Operating Time]. This fi eld is an optional item, set this if required. Set the unlock duration time on a
successful authorization by the access control.
Sample screen shows the case of SSA-P40x(T), when Door Lock is installed on the Relay 1. If the Door Lock is
not connected to the Relay 1, leave it empty and set the time in the corresponding relay in [System Management]
-> [Reader Point Setting].
9.
Select an [Auto Lock Time Schedule]. This fi eld is an optional item, set this if required. Use this option to set the
door to be opened or locked for the confi gured time schedule synchronized with the time schedule setting.
34_ System Management
> in the tool bar.
Advertisement
Table of Contents
