Samsung TECHWIN SAMS Pro User Manual page 28

System Management
9. Click [Auto Search Loop].

J
Searches and displays all devices found in the local network Devices already added are indicated as checked in the
Whether to use column. If the operating system is Windows Vista , Windows 7 Auto Search Loop function requires
disabling the Windows Firewall.
(Select the [Exception] tab in [Control Panel] > [Security Center] > [Windows Firewall]. Click [Add Programs] to
install SAMS Pro.)
10. Select a device to be added to the loop from the search result and use the down arrow key
< > to move to the bottom. Edit the network properties for the added device, such as IP address, subnet
mask, gateway, port number and baud rate.
Column Name
IP addres
Subnet Mask
Gateway
Port
Baud Rate
11. Click [Apply] to apply the changes.
12. Click Save <
13. When "Do you want to restart the communication server?" message appears, click [Yes(Y)].

J
If SAMS Communication Server Pro is running and site confi guration is properly done, communication server will
restart normally. If SAMS Communication Server Pro is not running or the site information is improperly confi gured,
communication server may fail to restart.
28_ System Management
Enter the IP address of the added device.
Enter the Subnet Mask of the added device.
Enter the Gateway address of the added device.
Enter the port number for the communication with the added device. It is recommended to use the default 5000.
Enter the baud rate of the network converter, which means communication speed.
> in the tool bar.
Descriptions