Table of Contents
Advertisement
1.
From the upper menu bar, select [Operation Management] > [Fire Group Setting].
2.
From the tool bar, click Add <
3.
Provide a fi re group name in the [Fire Group] input box.
4.
In the [Fire Input] list box, there displays a list of input items defi ned as fi re signal. Select a fi re input item.
J
If you fi nd nothing in the fi re input list, this is because you have not specifi ed any fi re signal for a specifi c input item
in the Input Point Setting menu. Move to [System Management] > [Input Point Setting], select an input point in the
Input Point Setting menu and set the [Input Type] to [Fire Sensor].
5.
Select a door that was open when a fi re signal occurred in the [Door List] and use the right arrow key <
move to the right. Or use the mouse to drag and drop an item.
6.
Click Save <
> in the tool bar.
7.
Modify – Use [Quick Search] at the top toolbar to fi nd desired data for modifi cation, change as necessary,
and click <
> to save changes.
8.
Delete – Use [Quick Search] at the top toolbar to fi nd desired data for deletion, select desired data to be
deleted, and click <
> to delete. If you are prompted to delete it, click [Yes].
>.
English Englis_
English _59
> to
Advertisement
Table of Contents
