Table of Contents
Advertisement
Lift
J
12 [Output Point No.] will be created for a registered lift. However, you must specify the [Floor] for the output point
number so that you can use it in [Output Time] setting or [Lift Access Group].
3.
Select [Floor].
4.
Select [Output Time]. This is an optional item. Set it if necessary. Output will last for a specifi ed time. The default
is [Not Use] for both [Floor] and [Output Time]. If you choose to enable [Floor], the default time will be set to [03].
5.
Select [Time Schedule]. This is an optional item. Set it if necessary. Output will be activated according to the
time schedule. The default is [Time Schedule Not Use].
6.
From the tool bar, click Save <
7.
If you are prompted to transfer your settings to the device, select [Yes] or click Transfer <
start transferring the settings.
8.
Modify – Click [Lift] > [Lift Output Setting] from the top menu and use [Quick Search] to fi nd desired data for
modifi cation, change as necessary, and click <
on the prompted dialog or click <
108_
lift
>.
> to save changes. Once completed with saving, click [Yes]
> button to send changed settings data to the corresponding device.
> in the tool bar to
Advertisement
Table of Contents
