Table of Contents
Advertisement
Device Management
MASTER CARD MANAGEMENT
You can register a new master card. 1 Master Card and fi ngerprint can be registered and managed by this function.
You can use the fi ngerprint scanner SSA-X500 for this function.
(This is not available in SAMS Pro Lite.)
Master Card Management [Add]
J
Master Card Management is available with SSA-S30xx and SSA-S21xx series products. And it requires the
fi ngerprint scanner SSA-X500.
Up to 10 master cards can be added to a SSA-S30xx or SSA-S21xx series product. Managing multiple master cards is
available only with the direct management by the device, and this program supports master card management for the fi rst one
1.
From the upper menu, select [Device Management] > [Master Card Management].
2.
Click Add <
3.
Select a [Company].
4.
Enter the [Card Number]. (For SSA-S30XX and SSA-S210x, you can set the Master Card as the PIN number.
To activate the PIN number, please select the [PIN number] checkbox.)
J
For further instructions on registration reader setup, refer to the Appendix C.
5.
Enter the [Password].
6.
Enter the [Master Card].
7.
Click [Fingerprint Registration] button for fi ngerprint registration.
J
For fi ngerprint registration, SSA-X500 fi ngerprint scanner must be installed. If installed with the fi ngerprint scanner,
connect the scanner to a USB port of the computer and install the SSA-X500 device driver.
50_ Device Management
> in the tool bar.
Advertisement
Table of Contents
