Access Type Setting; Fire Group Setting - Samsung TECHWIN SAMS Pro User Manual

Operation Management

ACCESS TYPE SETTING

Specify the access type of a card holder. You can specify, for instance, executive, partner and visitor, etc as you need.
Access Type Setting [Add]
1. From the upper menu bar, select [Operation Management] > [Access Type Setting].
2. From the tool bar, click Add <
3. Provide an access type in the [Access Type Name] input box.
4. Click Save <
5. Modify – Use [Quick Search] at the top toolbar to fi nd desired data for modifi cation, change as necessary,
and click < > to save changes.
6. Delete – Use [Quick Search] at the top toolbar to fi nd desired data for deletion, select desired data to be
deleted, and click <

FIRE GROUP SETTING

If confi gured with Fire Group Setting and a certain input is selected as the [Fire Sensor] in [System] > [Input Point Setting],
a corresponding input event will open doors assigned to the input for evacuation.
Fire Group Setting [Add]

J
This function will help open the entry door by releasing the lock on the door when a [Fire Sensor] event occurs,
which is specifi ed in [System Management] > [Input Point Setting]. This feature operates using SAMS Pro and SAMS
Communication Server Pro, which may not work for the following reasons:
- If fi re events are received late because of lots of events in standby
- If the system PC is turned off or does not work
- If the communication confi guration and settings with the device are not established and specifi ed properly
- If SAMS Pro or SAMS Communication Server Pro is not activated
This is just an auxiliary means to help opening the entry door when a fi re occurs so you must install a separate
hardware equipment to let you to manually open the door in case of a fi re.
If a fi re signal event occurs, SAMS Pro will open the doors of all registered sites. This is why you must specify the
applicable entry doors by setting the fi re group.
Note that when you are setting the fi re group, you must connect the Door Lock to Relay 1 for S30xx/S210x, and
Relay 1, 3, 8, and 10 for P40x(T), and Relay 1 for P102T.
(If you want to use SSA-P40xx as a fi re group, the Door Lock should have been connected to Relay Output 1, 3, 8, and 10.)
58_ Operation Management
>.
> in the tool bar.
> to delete. If you are prompted to delete it, click [Yes].