Table of Contents
Advertisement
System Management
9.
Set the [Communication Port].
10.
Set the [Speed] for the communication.
J
Communication speed, which is the baud rate, may differ from devices. You can specify the communication speed
for each device (access controller). When setting the communication speed, specifi ed both for the device and
management program must match. For setting the device's communication setting, refer to the product
documentation for further details.
11.
Click Save <
12.
When "Do you want to restart the communication server?" message appears, click [Yes(Y)].
J
If SAMS Communication Server Pro is running and site confi guration is properly done, communication server will
restart normally. If SAMS Communication Server Pro is not running or the site information is improperly confi gured,
communication server may fail to restart.
26_ System Management
> in the tool bar.
Advertisement
Table of Contents
