Samsung TECHWIN SAMS Pro User Manual page 120

Card Design
•
How to use [Image Editor]
- Using the source image
Click [Apply] in the bottom right of the [Image Editor].
- To select a part of the image
Step 1) From the image in the left of [Image Editor], specify a rectangle area to be used for the card
background image.
Step 2) The image of the selected area will be displayed in the top right corner of [Image Editor].
- To edit the image area
Step 1) From the image in the left of [Image Editor], specify a rectangle area to be used for the card
background image. (This should be performed if no area is selected.)
Step 2) While holding the rectangle box in the corner of the created rectangle area, use the mouse to set a
new area.
Step 3) The image of the selected area will be displayed in the top right corner of [Image Editor].
- Zoom In/Out
From [Image Editor], use the arrows of the Zoom In/Out combo box to enter an integer manually.
(Min : -10, max : 10)
- Rotate Image
From [Image Editor], use the arrows of the Rotate combo box, or enter an integer manually.
(Min : 0, max : 360)
- Reset Properties
Press [Reset Properties] to restore the original image.
- Save the edited image in the PC
An edited image (a change to the source image) indicates an image of which part is selected, zoomed
in/out, or rotated.
Step 1) Edit an image in [Image Editor].
Step 2) Click [Save] under the upper right image of the [Image Editor].
Step 3) Click [Yes] in the Save dialog.
120_ Card Design
<Dialog prompting you to confi rm the changes>