Samsung TECHWIN SAMS Pro User Manual page 35

Table of Contents

Advertisement

10.
Select a [Graphic Map / Icon]. This fi eld is an optional item, set this if required. Use this when you assign icons
for doors on a graphic map.
11.
Select an [Icon]. This fi eld is an optional item, set this if required. Sets the icon for the door.
12.
Set [Reader IN] and [Reader OUT]. If reader device is installed only for entering, set [Reader IN] only. Set
whether to use or not for each reader in [Use / Not Use] fi eld.
13.
Enter the [Reader].
14.
Select a [Reader Type].
J
For SSA-R1xxx series, select Proximity Reader. For SSA-S21xx and SSA-S30xx series products too, select Proximity
Reader since these Standalone controllers have built-in proximity readers. For SSA-R2000/2001, select Proximity
Reader+Keypad. For SSA-R2010/R2020/R2040/R2011/R2021/R2041 products, select Biometrics Reader.
15.
Select the [Biometrics Reader]. If the [Reader Type] is set to [Biometrics Reader], select the appropriate
biometrics reader.
16.
Select a [Operation Mode]. Operation Mode options differs from the reader types. [RF Only] authorizes access
only with the card. [RF+Fingerprint(Password)] authorizes access with combination of card and fi ngerprint or
card and password. [RF+Fingerprint+Password] authorizes access with combination of card, fi ngerprint and
password.
17.
Select whether to use [Operation Mode Time Schedule Usage]. This fi eld is an optional item, set this if required.
With linked to the time schedule, this function sets the reader's operation mode to RF Only within the specifi ed
time schedule despite of the mode setting, and sets to the designated operation mode during the time period
other than the scheduled time.
18.
Select the [Operation Mode Time Schedule]. Select the time schedule if the [Operation Mode Time Schedule
Usage] is set to [Use].
19.
Click Save <
> in the tool bar.
20.
Click Transmit button <
21.
Modify – Use [Quick Search] at the top toolbar to fi nd desired data for modifi cation, change as necessary,
and click <
> to save changes; and then click Send <
> in the toolbar to send the confi guration to the device.
> button.
English Englis_
English _35

Advertisement

Table of Contents
loading

Table of Contents