Table 9-6. Hdmi Signal Connections - Nvidia Jetson Orin NX Series Product Manual

Table 9-6. HDMI Signal Connections
Module Pin Name Type
DP1_TXD3_N/P DIFF
OUT
DP1_TXD[2:0]_N/P DIFF
OUT
DP1_HPD I
HDMI_CEC I/OD
DP1_AUX_N/P I/OD
HDMI 5V Supply P
Note: Any ESD and/or EMI solutions must support targeted modes (frequencies).
PRELIMINARY INFORMATION
Jetson Orin NX Series and Jetson Orin Nano Series
Termination (see note on ESD)
0.1uF series AC
CAP PD
ESD to GND . (series resistor)
S
connector side
to GND.
Gating circuitry, See connection figure for details.
ESD to GND. See connection
figure for level shifter details.
Adequate decoupling (0.1uF and 10uF
recommended) on supply near connector and ESD
to GND.
Description
(controlled by FET) HDMI Differential Clock: Connect to C
/C+ and pins on HDMI connector
HDMI Differential Data: Connect to HDMI
Data pins (Table 9-2)
level shifter HDMI Hot Plug Detect: Connect to HPD
GND on pin on HDMI connector
GND
HDMI Consumer Electronics Control:
Connect to CEC on HDMI connector
through circuitry.
level shifter HDMI: DDC Interface
Connect DP1_AUX_N to SDA and
DP1_AUX_P to SCL on HDMI connector
HDMI 5V supply to connector: Connect
to +5V on HDMI connector.
Display
Clock and Data:
DG-10931-001_v1.1 | 58