Figure 9-5.
S-Parameter Up to HBR3
Table 9-4.
eDP and DP Signal Connections
Module Pin Name
Type
DP1_TXD[3:0]_N/P
O
DP1_AUX_N/P
I/OD
DP1_HPD
I
PRELIMINARY INFORMATION
Jetson Orin NX Series and Jetson Orin Nano Series
Termination
Series 0.1uF capacitors and ESD to GND on
all.
Series 0.1uF capacitors DP1_AUX_CH_P
pulled to GND through 100k resistor.
DP1_AUX_CH_N pulled to VDD_3V3_DP
through 100k resistor.
100k series resistor and 100k resistor to
GND then Level shifter (non-inverting)
between connector and module pin.
Description
eDP/DP Differential CLK/Data Lanes:
Connect to matching pins on display
connector.
eDP/DP: Auxiliary Channels: Connect to
AUX_CH-/+ on display connector.
eDP/DP: Hot Plug Detect: Connect to HPD
pin on display connector through level shifter.
DG-10931-001_v1.1 | 51
Display