Digital Audio Recording With Md Recorder - Sherwood RD-8108 User Manual

Start recording on the VIDEO 1.
3
DIGITAL AUDIO RECORDING WITH
• Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD
recorder or CD recorder, you can enjoy high-quality sound of digital recording without converting the original
signals. Refer to " CONNECTING AUDIO/VIDEO COMPONENTS" and "CONNECTING DIGITAL INs and OUT"
on page 6 and 7 and the operating instructions of the MD recorder or CD recorder.
Notes:
• Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.
• In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
• There are some restrictions on recording digital signals. When making digital recordings, refer to the operating
instructions of your digital recording equipment to know what restrictions are imposed.
Select a desired input of CD, VIDEO 1~3
as a recording source.
1
POWER
AUDIO CD
VCR DVD
MACRO
M1 M2
SPK SET PL PARA.
ADJUST
AUDIO VIDEO
AUDIO SEL. SUBTITLE
AUTO DSP
OSD
SETUP
ENTER
or
SLEEP
DISPLAY
TUNE
+10
TUNER CD AUX
1 2
VIDEO1 VIDEO2 VIDEO3
6 7
UNIVERSAL REMOTE CONTROL
RNC-40
Start recording on the component
connected to OPTICAL DIGITAL OUT.
3
STANDBY
AUX TV
CABLE SAT
M3
CH SEL. CH/LEVEL
MUTE
VOLUME
ZOOM
STEREO
CD
T.TONE
MENU
2
DIMMER
RETURN
P .SCAN
PRESET
VIDEO1 VIDEO2 VIDEO3
7CH DIR.
TAPE
3 4 5
6 7 8
8 9 0
3 0
Start play on the VIDEO 2 and the CD
respectively.
4
• The audio signal from the CD and the video signal
from the VIDEO 2 will be dubbed and you can
enjoy them on the TV set and from the speakers.
Note : Be sure to observe the order of the above steps
1 and 2.
For digital recording, select the desired
digital input as recording signal input.
2
DIGITAL
INPUTS
• Each time this button is pressed, the corresponding
input is selected as follows:
A(nalog) c(oaxial) 1
o(ptical) 2 o(ptical) 1
Note : When the selected digital input is not
connected, "DIGITAL" indicator flickers.
There will be no recording as well as no sound.
Start play on the desired input.
4
c(oaxial) 2