Installing The Covers; Installing/Removing The Cover At The C-Arm Mounting; Telescoping Cover Underneath The Horizontal Carriage - Siemens SIREMOBIL Iso-C Service Instructions Manual

1 - 16

Installing the covers

•
Begin with the lower back cover.
•
Reattach the protective conductor for the lower cover.
•
Install the cover and tighten the screws.
•
Reattach the protective conductor for the upper back cover plate.
•
Install the cover and tighten the screws.

Installing/removing the cover at the C-arm mounting

•
Remove the cover screws and remove both covers from the side.
•
After completing the procedure, reinstall both covers in the reverse order.

Telescoping cover underneath the horizontal carriage

•
Remove the four lower screws.
•
Slightly loosen the two front screws and remove the telescoping cover from the bottom.
SIREMOBIL Iso-C
System Manual
SPR2-230.061.01
Rev. 13 12.04
Prerequisites
Page 16 of 18
CS PS 24
1
1
1
Siemens AG
Medical Solutions