Table of Contents
Advertisement
1. OPERATIONAL OVERVIEW
How to set mid position
With [Mid Key Setting] in the [Others] menu set to [Fixed Position], click the transducer
position mark to show the window shown in the right figure. Click or to change
the setting. Click [Quit] to close the window.
1.4
Screen Brilliance and Panel Dimmer
How to adjust the screen brilliance
If your monitor is FURUNO and the monitor is connected to the processor unit via
USB, you can adjust the screen brilliance from the control unit. Turn the BRILL knob
clockwise to increase, or counter-clockwise to decrease, the brilliance.
Note: If your monitor is not FURUNO, brilliance cannot be adjusted from the control
unit. Adjust the brilliance at the monitor.
How to adjust the panel dimmer
You can change the brightness of the panel and keys with the following procedure.
1. Press the MENU/ESC key to open the menu.
1-8
Mid protrusion
Quit
Cancel
5%
(5~95)
Menu
TX/RX Setting ...
Gain Setting ...
Display Setting ...
Picture Setting ...
Others ...
Shortcut Menu
Quit
Advertisement
Table of Contents
