Table of Contents
Advertisement
Display format
The on-screen display area is comprised of a data display area and an echo display
area. You can select one of two display formats, as indicated below. One shows the
echoes with the outermost range ring as the boundary, the other shows echoes in a
full-screen display. The full-screen format allows you to view echoes which would oth-
erwise require a change in range. For more information about the data display area,
see chapter 6.
1.5.1
How to select a display mode
Press the MODE key several times until the desired display appears. The default
modes are Horizontal, Horizontal1 + Horizontal2, Vertical1 and Vertical1 + Vertical2.
You can program the MODE key to show any or all of the modes mentioned above.
For further details, see "Display Mode" on page 7-6.
The MODE key may be programmed to show a pull-down menu instead of a conven-
tional menu.
1. Push the right-click button on the numeric/graphic data display.
2. Select [Display Mode] then push the left-click button.
3. Select the mode to display then push the left-click button.
Echo picture
Echo picture
Echo picture
display (Within
display (Within
display (Within
Range)
Range)
Range)
1. OPERATIONAL OVERVIEW
Echo picture
Echo picture
Echo picture
display (Full
display (Full
display (Full
Screen)
Screen)
Screen)
1-11
Advertisement
Table of Contents
