Slant Mode; Basic Operating Procedure - Furuno FSV-85 MARK-2 Operator's Manual

4.

SLANT MODE

4.1

Basic Operating Procedure

Turn the power on.
V1/S V2/S
AUTO
TRAIN
Push applicable key. (For setting train angle.)
V1: Left, V2: Right
Lower the transducer.
• If the mid protrusion key is programmed to [Fixed Position]:
Lowers the transducer to half protrusion.
• If the mid protrusion key is programmed to [Any Position]:
The transducer stops at desired position.
Lowers the transducer to full protrusion.
H/V/S H/V/S
Set the display range.
Adjust the gain.
Select single "S" mode or
combination "S" mode.
Adjust the tilt.
Select mode
(horizontal/vertical,
H1/H2) for range and
gain adjustment.
4-1