Lowering, Raising The Transducer; Lowering The Transducer; Raising The Transducer; Screen Brilliance, Panel Dimmer - Furuno FSV-35 Operator's Manual

1.3

Lowering, Raising the Transducer

1.3.1

Lowering the transducer

With the boat at the fishing ground and the power on, press the
above the key pressed blinks during lowering and lights when the transducer is com-
pletely lowered to selected protrusion distance. It takes about 22 seconds for full pro-
trusion in case of 1200 mm stroke and 29 seconds in case of 1600 mm stroke. In
normal use fully lower the transducer. If the transducer becomes entangled in the net
for some reason, partially raise the transducer with the
ducer by 400 mm.
1.3.2

Raising the transducer

Press the
transducer is being raised and lights steadily when it is fully raised.
1.4

Screen Brilliance, Panel Dimmer

1.4.1 Screen brilliance
The brilliance of an external monitor can not be adjusted from the control unit. Use the
associated control on the monitor.
CAUTION CAUTION
Maximum speed while the transducer is
projected and being raised or lowered
is as below, to prevent damage to the
transducer.
1200 mm stroke Max. 18 kn Max. 15 kn
1600 mm stroke Max. 15 kn Max. 12 kn
key to raise the transducer. The lamp above the switch blinks while the
1. OPERATIONAL OVERVIEW
Projected Raising/
Lowering
or key. The lamp
key. This raises the trans-
1-5