Vertical Mode; Basic Operating Procedure - Furuno FSV-85 MARK-2 Operator's Manual

3.

VERTICAL MODE

3.1

Basic Operating Procedure

Turn the power on.
V1/S V2/S
AUTO
TRAIN
Press appropriate key.
Lower the transducer.
• If the mid protrusion key is programmed to [Fixed Position]:
Lowers the transducer to half protrusion.
• If the mid protrusion key is programmed to [Any Position]:
The transducer stops at desired position.
Lowers the transducer to full protrusion.
H/V/S H/V/S
Set the display range.
Adjust the gain.
Select a vertical display.
Set vertical bearing
mark to display in
vertical display.
Press to choose
the screen
(horizontal or
vertical) to adjust
gain and range.
3-1