How To Load Files; How To Load The Setting Information - Furuno FSV-85 MARK-2 Operator's Manual

8. RECORD/RECALL OPERATION
8.5

How to Load Files

8.5.1

How to load the setting information

This section shows you how to load the setting information saved at section 8.4.
1. Push the right-click button on the numeric/graphic data display to show the pop-
up menu.
2. Select [Record/Recall] then push the left-click button.
3. Select [Setting File] then push the left-click button.
4. Select [Load] then push the left-click button.
Progress bar
5. Select the file to load.
6. Select [Load] then push the left-click button.
The progress bar at the bottom of the box shows the loading progress. The [Set-
ting File] menu is appears when the saving is completed.
7. Long-press the MENU/ESC key to close all menus.
8-6
Destination list