Horizontal Mode; Basic Operating Procedure - Furuno FSV-85 MARK-2 Operator's Manual

2.

HORIZONTAL MODE

2.1

Basic Operating Procedure

Turn the power on.
V1/S V2/S
AUTO
TRAIN
Press to choose the screen (horizontal or vertical or
horizontal1 or horizontal2) to adjust gain and range.
Lower the transducer.
• If the mid protrusion key is programmed to [Fixed Position]:
Lowers the transducer to half protrusion.
• If the mid protrusion key is programmed to [Any Position]:
The transducer stops at desired position.
Lowers the transducer to full protrusion.
H/V/S H/V/S
Set the display range.
Adjust the gain.
Select horizontal display.
Set the tilt angle.
2-1