Table of Contents
Advertisement
4. Select [Net Course Mark] then push the left-click button. Instructions for how to set
the net course mark appear on the display.
5. Use the trackball to position the net course mark, which is shown by a dashed cir-
cle.
6. Push the left-click button to set, and the dashed circle changes to a solid one.
7. Long-press the MENU/ESC key to close all menus.
Note 1: To delete the net course mark select [Delete] at step 4.
Note 2: The default function of the 0/F10 key deletes the oldest net course mark.
4.20
Net Data
With net sonde connection you can observe net data after the throwing of the net.
Press the SHOOT key just upon throwing the net into the water to display the net shoot
data and net depth data. To erase the data, press the key again.
Note: To enable this feature, set Event Key to Event in the Mark Display menu.
202m
193m
59m
B
296°
Net course mark
Move trackball cursor to net course mark
position and left click.
Press R/B key to cancel.
NET SHOOT DATA
Distance run from shooting of net
Time elapsed from shooting of net
0.53NM
5:32
2000
<<Set net course mark>>
°
°
NUMERIC
DATA
DISPLAY
NET DEPTH
S1 178m
S2 134m
S3 150m
4. SLANT MODE
Net depth
data
4-29
Advertisement
Table of Contents
