Current Vec & Wind Menu - Furuno FSV-85 MARK-2 Operator's Manual

Water Temp Range: Selects the time range to show water temperature, 20 Minute, 1
Hour, 6 Hours, 12 Hours or 24 Hours.
7.6.6 Current Vec & Wind menu
The [Current Vec & Wind] menu sets up tidal current and wind data. Select [Current/
Wind] on [Initial Setting] menu then push the left-click button.
Current Data: Selects how to display current data; absolute or in relation to layer 1,
layer 2 or layer 3 or layer 4 or layer 5.
On Own Ship Mark: Shows or hides the current mark on the own ship mark.
On Ship Pos Mark: Shows or hides the current mark on the own ship position mark.
On Net Shoot Mark: Shows or hides the current mark on the net shoot mark.
Current Flow Dir: Selects how to display current data. [FROM] shows from what di-
rection the current is flowing; [TO] shows the direction the current is heading. Requires
connection of a current indicator.
Wind: Selects wind display; OFF, relative wind data or true wind data.
Select Water Current: Select water current to show. Select the [Select Water Current]
and right click, the setting box is shown. Then, select the water current (Max. 3). Se-
lected water current is shown with [].
Select Water Current
Current Vector
1
2
3
TO
7. OTHERS MENU
1
2
3
FROM
7-13