Table of Contents
Advertisement
6.2.1
How to execute a program
1. Press desired function key to show the applicable dialog box.
2. Press the same function key again within five seconds to execute the function.
The dialog box automatically disappears in five seconds. You can also close the
dialog box manually by pressing any function key other than the one pressed at
step 1.
Note: Functions registered to the function keys can be activated by using the soft-
ware function keys which appear at the bottom of display.
6.2.2
How to program the function keys
You can change the default setting of a function key or register a timer function to a
function key as shown below. Note that some menu items cannot be programmed to
the function keys. See the menu tree on page AP-1 to AP-5 for items which can be
programmed for function keys.
1. Press the MENU/ESC key to open the menu.
2. Place the cursor on the desired function and select to highlight it in yellow. To reg-
ister the timer function, left-click on the display "00:00:00" to highlight it in yellow.
Note: To show/hide the timer, select [ON] or [OFF] in [Timer Display] menu of
[Display Setting] menu.
3. Press desired function key for more than one second. The message shown below
appears for five seconds.
4. Press the same function key again, and the message shown below appears.
Note: The [Function Key Registration] window location can be adjusted.
Consult a FURUNO technician to adjust the location.
When the 8/F8 key is pressed
6. HOW TO CUSTOMIZE THE SONAR
6-3
Advertisement
Table of Contents
