How To Use The Menu - Furuno FSV-25 Operator's Manual

1. OPERATIONAL OVERVIEW
2. Adjust the GAIN control.
New gain setting is momentarily displayed in large characters at the top of each dis-
play. The setting value is always displayed next to "G". (For the vertical display, the
gain indication is shown at the bottom of the display.)
Note 1: The gain can also be adjusted from the gain indication. Put the cursor on the
gain indication to highlight it in yellow then roll the scrollwheel.
Note 2: The default function of the F10 key is [Gain Knob Setting], which adjusts the
gain. See page 6-4.
1.9

How to Use the Menu

Most operations are carried out from the menu. This section provides basic menu op-
erating information.
1. Press the MENU/ESC key to open the main menu.
Menu title
Select "Shortcut Menu"
to show the menu title
you programmed.
(See section 5.1.)
Note: You can also show the main menu by pushing the right button to show the
pop-up menu. See page 1-16.
2. Operate the trackball to place the arrow cursor ( ) on the item you want to select.
The yellow cursor marks the current selection. You can also use the scrollwheel
to select a menu item.
1-14
H-UP
H R 400m
T 17°
Put the cursor on the gain setting,
which is then highlighted in
G 1. 0
40
yellow. Spin the scrollwheel to
P 8
change the setting.
50
Menu
TX/RX Setting ...
Gain Setting ...
Display Setting ...
Picture Setting ...
Others ...
Shortcut Menu
The descriptions for the selected item appears in this field.
Quit
Select [Quit] with
trackball and then left
click to close the menu.
"..." means that this
item has sub menus.