How To Use The Menu - Furuno CH-500 Operator's Manual

1. OPERATIONAL OVERVIEW
1.7

How to Use the Menu

This section covers how to access the menu. For menu details, see chapter 5.
1. Press the MENU key. The menu window appears.
Menu
bar
Menu
items
Operational
guidance
2. Press
3. Press
The selected item is highlighted. The example figure above shows the [COM1]
menu and the menu title at the top of the screen is highlighted.
4. Press
The guidance box at the bottom of the screen shows a brief explanation for the
selected item and the operations allowed for the selected menu item.
The selected item is also highlighted in the same manner as described in step 3.
5. Press
6. Press
7. To save and apply changes, press the MENU key.
Note: If you change a setting, then select a different menu item, the changes made to
the first menu item are saved.
1-8
Menu COM1
TX Power High
TX Pulse length Long
TX Rate 1 0
Interference Off
AGC 0
Auto Filter Std.
Reverberation Off
Volume 0 . 0
: Select : Change
Note: The CH-600 can set [Interference], [AGC] and [Auto Filter] for LF
and HF respectively.
to select the menu bar.
or to select a menu.
or to move the cursor inside the menu and select a menu item.
or to show the settings for the select menu item.
or to adjust or change the settings for the selected menu item.
COM2 HOR. VERT
Menu: Apply
ES FUNC Key System