Function Keys (F1 To F10); How To Execute A Program; How To Program The Function Keys - Furuno FSV-25S Operator's Manual

5.2

Function Keys (F1 to F10)

The function keys provide one-touch display of desired menu item or entire menu. The
default function key settings are as below. Not all menu items and menus may be pro-
grammed to the function keys. See the menu tree on page AP-1 to AP-5 for items
which may be programmed.
Function key
F1 Record Still Image
F2 Recall Still Image
F3 Event Mark 1
F4 Event Mark 1
F5 Fish Mark
F6 Own Ship Pos Mark
F7 Ship's Track
F8 Stabilization
F9 Net Course Mark
F10 Gain Setting Knob
5.2.1

How to execute a program

1. Press desired function key to show the applicable dialog box.
2. Press the same function key again within five seconds to execute the function.
The dialog box automatically disappears in five seconds. You can also close the
dialog box manually by pressing any function key other than the one pressed at
step 1.
5.2.2

How to program the function keys

You can change the default setting of a function key as shown below. Note that some
menu items can not be programmed to the function keys. See the menu tree on page
AP-1 to AP-5 for items which can be programmed for function keys.
1. Press the MENU/ESC key to open the menu.
2. Press desired function key for more than one second. The message shown below
appears for five seconds.
Default setting
Save the still image
Open the [Still Image] window
Erase event mark 1
Erase event mark 2
Erase fish mark
Erase own ship position mark
Erase approx. 10% of the ship's track
Activate or deactivate the stabilization
Enter or erase the net course mark
Change function of GAIN control. See page 6-4.
<<Stabilization>>
OFF
When the F8 key is pressed
<<Function Key Registration>>
Replace the function to new setting.
Press the key again to proceed.
5. HOW TO CUSTOMIZE THE SONAR
Function
ON
5-3