How To Execute A Program; How To Program The Function Keys - Furuno FSV-85 Operator's Manual

6.2.1

How to execute a program

1. Press desired function key to show the applicable dialog box.
2. Press the same function key again within five seconds to execute the function.
The dialog box automatically disappears in five seconds. You can also close the
dialog box manually by pressing any function key other than the one pressed at
step 1.
6.2.2

How to program the function keys

You can change the default setting of a function key as shown below. Note that some
menu items cannot be programmed to the function keys. See the menu tree on page
AP-1 to AP-5 for items which can be programmed for function keys.
1. Press the MENU/ESC key to open the menu.
2. Press desired function key for more than one second. The message shown below
appears for five seconds.
3. Press the same function key again, and the message shown below appears.
6. HOW TO CUSTOMIZE THE EQUIPMENT
When the F8 key is pressed
6-3