Enabling Job Accounting - Kyocera ECOSYS M2040dn Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Enabling Job Accounting

Enabling Job Accounting

1
2
Display the screen.
1
[System Menu/Counter] key > [▲] [▼] key > [User/Job Account] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M2135dn/ECOSYS
M2635dn/ECOSYS M2635dw
ECOSYS M2040dn/ECOSYS
M2540dn/ECOSYS M2540dw
2
[▲] [▼] key > [Job Account.Set.] > [OK] key
Configure the settings.
[▲] [▼] key > [Job Accounting] > [OK] key > [▲] [▼] key > [On] > [OK] key
NOTE
• To disable job accounting, select [Off].
• When the display returns to System Menu default screen, logout is automatically executed
and the screen to enter the Account ID appears. To continue the operation, enter the
Account ID.
Login User Name
3500
4000
9-24
Login Password
3500
4000